Height Adjustment - Viking VDSC367 Service Notebook

Service Procedures
3. Remove grille assembly.
4. Remove four side screws and remove unit
top.
5. Loosen the four hinge screws. Adjust door.
6. Reverse procedure for reinstallation.

Height Adjustment

Removal of the kickplate allows access
to rollers and stabilizing legs for height
adjustment.
44
1. Remove lower kickplate screws using a
Phillips screwdriver.
2. Remove upper kickplate screws using a
Phillips screwdriver. Remove kickplate
assembly.
3. Using a 5/16" head wrench, turn the front
(F) adjustment screws to raise or lower
the front of the refrigerator.
Note: DO NOT use an electric device. Over
tightening can cause damage.
©2012 Viking Preferred Service