Thermal Cut Out (Tco); Freezer Evaporator Fan - Viking VDSC367 Service Notebook

Hide thumbs Also See for VDSC367:
Table of Contents

Advertisement

To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Ensure all ground wires are connected before certifying unit as
repaired and/or operational.

Thermal Cut Out (TCO)

The TCO is a safety device and must NOT
be bypassed. If the TCO is found to be
electrically open, this indicates an overheat
in the ice maker and the ice maker must be
replaced.
TCO

Freezer Evaporator Fan

1. Remove lower freezer baskets.
2. Remove screws securing left and right
freezer glides and remove glides.
Freezer glides
©2012 Viking Preferred Service
!
WARNING
3. Remove right side light lens (see interior
lights page 53).
4. Remove screws and center evaporator
cover.
Disassembly
Light lens
Evaporator Fan Cover
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fdsb5421Vcsb5421Fdsb5481

Table of Contents