Fuel System Maintenance; Replacing The Fuel Filter - Toro 74920 Operator's Manual

Fuel System
Maintenance

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever
comes first) (more often under dusty,
dirty conditions).
1. Disengage the blade control switch (PTO), move the
motion control levers to the neutral lock position,
and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the machine to cool down.
4. Raise the seat and locate the fuel filters as shown in
Figure 51.
1
2
5
4
Figure 51
1. Fuel line from tank
2. In-line Fuel filter
3. Flow direction arrow
5. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 52).
3
g017723
4. Fuel line to engine
5. Hose clamp
G008963
1. Fuel filter
2. Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter with the flow direction arrow
coming from the fuel tank and pointing to the
engine. Move the hose clamps close to the filter
(Figure 51) to secure it in place.
41
1 2
3
Figure 52
3. Fuel line