Table of Contents
Advertisement
Figure 19
1. Mulching baffle
3. Verify that mulching baffle does not interfere with
the tip of the blade and does not protrude inside the
surface of the rear chamber wall.
WARNING
Do not use the high lift blade with the
mulching baffle. The blade could break,
resulting in personal injury or death.
1
G011347
Product Overview
Controls
1. Forward traction pedal
2. Reverse traction pedal
3. Mow/transport slide
Traction Pedals
Press the traction forward pedal (Figure 20) to move forward.
Press traction reverse pedal (Figure 20) to move backward or
to assist in stopping when moving forward. Also, allow the
pedal to move or move it to the neutral position to stop the
machine.
Mow/Transport Slide
Using your heel, move the mow/transport slide (Figure 20)
to the left to transport and to the right to mow. The cutting
units will only operate in the mow position.
Important: The mow speed is set at the factory to 9.7
km/h (6 MPH). It can be increased or decreased by
adjusting the speed stop screw (Figure 21).
1. Speed stop screw
19
Figure 20
4. Tilt steering lever
5. Indicator slot
6. Angle indicator
Figure 21
Advertisement
Table of Contents
