Specifications; Attachments/Accessories - Toro 30809 Operator's Manual

Lift Lever Lock
Move the lift lever lock (Figure 22) rearward to prevent the
cutting units from dropping.
Fuel Gauge
The fuel gauge (Figure 23) registers the amount of fuel in
the tank.
g021400
Figure 23
1. Fore and aft lever
Fore and Aft Seat Adjustments
Move the lever (Figure 23) on the side of the seat outward,
slide the seat to the desired position, and release the lever
to lock the seat into position.
1
2
2. Fuel gauge

Specifications

Note: Specifications and design are subject to change
without notice.
Overall Width
Width of Cut
Length
Height to top of ROPS
Wheel Base
Track Width
Ground Clearance
Weight with cutting units
Cutting Deck
Length
Width
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
21
182 cm (71.8 inches)
173 cm (68 inches)
295 cm (116 inches)
180 cm (70.8 inches)
149 cm (58.5 inches)
145 cm (57 inches)
15.3 cm (6 inches)
963 kg (2,124 lb)
86.4 cm (34 inches)
86.4 cm (34 inches)
24.4 cm (9.6 inches)
to carrier mount
26.7 cm (10–1/2 inches)
at 3/4 inch height of cut
34.9 cm (13–3/4 inches) at
4 inch height of cut
88 kg (195 pounds)