Service Interval Chart
Premaintenance
Procedures
Removing the Hood
The hood may be easily removed to ease maintenance
procedures in the engine area of the machine.
1. Unlatch and raise the hood.
2. Remove the hairpin cotter securing the hood pivot to
the mounting brackets (Figure 34).
Figure 33
1. Hairpin cotter
3. Slide the hood to the right side, lift the other side, and
pull it out of the brackets.
Note: Reverse the procedure to install the hood.
Using the Cutting Deck Service
Latch
When servicing the cutting decks, use the service latch to
prevent injury.
1. Center the cutting deck sidewinder with the traction
unit.
34
Figure 34