Table of Contents
Advertisement
Installing the Drawbar Hitch
Pin
Insert the drawbar hitch pin into the drawbar hitch and
secure it with a 0.50 in. inside diameter flat washer and
hairpin cotter (Fig. 60).
2
4
Figure 60
1. Drawbar hitch pin
2. Drawbar hitch
Checking the Wiring and
Fasteners
• Inspect the tractor for any loose electrical connections
and secure them as required.
• Check the wire routing to make sure moving parts do
not interfere with wires and cause a short.
• Ensure that all fasteners are tight.
Test Driving the Tractor
1. Check the oil level in the crankcase, refer to Checking
the Engine Oil, page 10.
2. Check the oil level in the transaxle, refer to Checking
the Transaxle Oil, page 28.
3. Grease the tractor, refer to Greasing the Tractor,
page 24.
4. Fill the tank with unleaded regular gasoline with an
octane rating of at least 85.
5. Open the fuel shutoff valve and check the fuel hose
and fittings for leaks.
1
3
m–2481
3. .50" Flat washer
4. Hairpin cotter
43
6. As applicable, check and test the operation of the
following:
• Engine, choke and throttle controls
• Gauges
• Headlights and taillights
• Indicator lights
• PTO clutch and brake
• Lift system
• Service and parking brakes
• Transmission controls
• Steering
• Tractor operation in forward and reverse
7. Test the operation of the safety interlock system, refer
to Testing the Safety Interlock System, page 14.
Advertisement
Table of Contents
