Table of Contents
Advertisement
allows you to make turns at higher speeds without having
to change the speed control position. After the turn, the
original speed is automatically restored.
The Smart Turnt Steering feature does not affect engine
speed.
This system was set at the factory and should not need
adjustment.
Danger
Driving with excessive speed while turning can
cause you to rollover, resulting in serious injury or
death to you or bystanders.
• Do not rely on the Smart Turn steering feature
to avoid accidents while turning.
• Read, understand, and follow all instructions in
the Operator's Manual and on the machine
before starting.
Maintenance
Recommended Maintenance Schedule
Maintenance Service
Interval
Each Use
25 Hours
50 Hours
100 Hours
Maintenance Procedure
• Engine oil—check level
• Brakes—check
• Safety System—check
• Air-intake screens—clean
1
• Engine area—clean
• Rear transaxle cover—clean
• Engine air precleaner—clean
• Tires—check pressure
• Battery—check electrolyte level
• Transaxle—check oil level
• Grease fittings—grease
• Power take off (PTO) belt—check tension
2
• Engine oil—change
• Engine air filter—replace
• Fuel filter—replace
19
Pushing the Machine by Hand
Important
Do not tow the machine because
transmission damage may occur. Always push the
machine by hand.
1. Disengage the PTO and stop the engine.
2. Move the High-Low range lever to the neutral position
(N).
This allows the rear wheels to turn freely.
3. Push the machine to the desired location.
4. Place the lever high or low after moving the machine,
and set the parking brake.
1
1
1
1
Advertisement
Table of Contents
