Auto Scan - One for All URC-7560 User Manual & Code Book

Advanced Features

Auto Scan

Your ONE FOR ALL 6 comes with a special Scan function which
lets you "scan" through every programme available on your
TV, VCR, Satellite or Cable Box.
For example, to scan the programmes on your TV:
1 Aim the ONE FOR ALL 6 at your TV. Press
the TV key. Press and release MAGIC
then press the MUTE key.
The ONE FOR ALL 6 will send the
command to advance through all the
programmes available on your Television
stopping at each programme for about
three seconds. Remember, you must aim
the ONE FOR ALL at your device the
entire time you are using Scan.
2
When you find a programme you would
like to watch, simply press any key on
the ONE FOR ALL key pad to stop the
scan feature.
Important notes:
- To use Scan with your VCR, Satellite or Cable Box, follow the
same instructions above, only press the VCR or SAT key during
step 1.
- Scan may not work with devices that did not have programme +/-
keys on the original remote control.
Favorite Programme Scan
Instead of Auto Scan, you can set your ONE FOR ALL 6 to scan
through up to 10 of your favorite programmes. To set up your
favorite programmes for your TV:
Press and release the ONE FOR
1
ALL 6's TV key.
Hold down the MAGIC key until the
2
TV key blinks twice (the TV key will blink
once then twice).
3
Press 9 9 6.
4 Enter the number for the first
programme you wish to be included as
a "favorite programme". Then press and
release MAGIC.
(You must enter the programme number
exactly as you would on your original
remote. Example: If to get programme 5
you had to press 05 or if you used the 10,
20 or -/-- keys, you will need to do the
same on the ONE FOR ALL 6.)
5 Enter the next programme number
you wish to be included as a "favorite
programme". Then press and release
MAGIC.
26
WWW.ONEFORALL.COM