Installing The Batteries; The Keypad - One for All URC-7560 User Manual & Code Book

Installing the Batteries

Your ONE FOR ALL 6 needs 2 new "AA/LR6" alkaline batteries.
1 Remove the battery cover from the
back of your ONE FOR ALL 6 by
pressing down on the tab.
Match the batteries to the + and -
2
marks inside the battery case, then
insert the batteries.
Press the battery cover back into
3
place.
Important notes:
- On the inside of the battery compartment door you will
find a label on which to write your Set-Up codes after
your ONE FOR ALL 6 is set up for your device. Please
write down your codes for easy, future reference.
- Do not use rechargable batteries
- Upon changing the batteries, your set-up codes and
advanced programming will be retained.

The Keypad

Function
Magic Key
The Magic key is used to set up your ONE
FOR ALL 6 and to access special functions.
Menu Key
The Menu key (see page 25) controls the
same function as it did on your original
remote. If available on your original remote
control, this key will allow you to access the
Surround mode of your device.
Power Key
The Power key controls the same function as
it did on your original remote.
4
WWW.ONEFORALL.COM