Advanced Features; Colour And Brightness; Auto Scan - One for All URC-7010 Manual

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR
ALL 1 may operate the colour and brightness settings of your television.
Colour (+)
Colour (-)
Brightness (+) = Press and release MAGIC then hold Channel (+)
Brightness (-) = Press and release MAGIC then hold Channel (-)
Important note: You have 5 seconds to press the Volume or Channel keys
for the colour or brightness adjustments after pressing MAGIC.

Auto Scan

Your ONE FOR ALL 1 comes with a special Scan function which lets you scan
through every channel available on your television.
To scan the channels on your TV:
1 Aim the ONE FOR ALL 1 at your TV. Press the TV key. Press and relea-
se MAGIC then press the MUTE key.
The ONE FOR ALL 1 will send the command to advance through all
the channels available on your television stopping at each channel
for about three seconds. Remember, you must aim the ONE FOR ALL
1 at your television the entire time you are using scan.
2 When you find a channel you would like to watch, simply press any
key to stop the scan.
Important note: Auto Scan may not work with devices that do not have
Channel +/- keys on the original remote control.
WWW.ONEFORALL.COM

Advanced Features

= Press and release MAGIC then hold Volume (+)
= Press and release MAGIC then hold Volume (-)
9