Installation; Setting Up Your Television - One for All URC-7560 User Manual & Code Book

Installation

Setting Up Your Television

To set up the ONE FOR ALL 6 for your TV, follow the
instructions below.
1
Find your 4-digit Television code in the
Set-Up Code section (starting on page
11). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on
(not in standby).
2 Press and release your ONE FOR ALL 6's
TV key.
Press and hold down the MAGIC key
3
until the TV key blinks twice (the TV key
will blink once then twice).
4 Enter your four-digit TV code using the
_ _ _ _
number keys. The TV key will blink twice.
Now, aim the ONE FOR ALL 6 at your
5
Television and press POWER. If your
Television switches off, your ONE FOR ALL 6
should be ready to run your Television.
Turn your device back on and try all the
6
remote's functions to ensure they are
working properly (you may need to press
a number key instead of power). If the
functions do not work properly, repeat
steps 1-5 using another code listed under
your brand.
7
Write your code in the boxes
provided in the battery compartment
and on page 11 for easy future
reference.
Important notes:
- Some codes are quite similar. If your device does not respond or
is not functioning properly with one of the codes, try another
code listed under your brand.
- If your television does not respond, follow steps 1 through 6 with
each code listed for your brand. If none of the codes listed for
your brand operate your device or if your brand is not listed at
all, try the search method described on page 9.
- Remember, to control your television after the ONE FOR ALL is
set up, you must press the TV key.
WWW.ONEFORALL.COM
7