You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries. Your ONE FOR ALL 3 can operate three devices: a Television, a Video Recorder and a second Television or Video Recorder.
The LED (Light Emitting Diode) flashes red to show the remote is working. MAGIC Key The MAGIC key is used to set up your ONE FOR ALL 3 and to access special functions. POWER Key The Power key controls the same function as it did on your original remote.
Page 5
Video Recorder Keys After pressing the VCR key, the Video Recorder keys operate the functions of your Video Recorder. To prevent accidental recording, the Record key must be pressed twice to start recording. Teletext and Fastext Keys After pressing the TV key, the top row of the VCR keys is used to operate the main Teletext functions.
The most popular code is listed first. Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL 3 for the device you wish to set up. Press and hold down MAGIC until the red light blinks twice.
The Search Method If your device does not respond to the ONE FOR ALL 3 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 3.
Using the AUX key Example: To program a second television on the AUX key, you need to change the AUX key into a TV key, so press: The AUX key has now become a second TV key. Now enter the SET-UP code for your second TV by pressing: Hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice).
“scan” through every programme available on your device. For example, to scan the programmes on your TV: Aim the ONE FOR ALL 3 at your TV. Press the TV key. Press and release MAGIC then press the MUTE key.
- Remember, when using the ONE FOR ALL Sleeptimer, you must set the remote so it is pointing to your device. - The ONE FOR ALL Sleeptimer can be set up for only one device at a time. will blink 4 times.
Helpful Hints Problem: Your brand is not listed in the code section? The ONE FOR ALL does not operate your device(s)? The ONE FOR ALL is not performing commands properly? Problems changing channels? Video not recording? The ONE FOR ALL does...
Customer Service If you still have questions about the operation of your ONE FOR ALL 3 universal remote and could not find the answer(s) in the trouble shooting section, you may want to contact the customer service department for assistance.
Page 21
GARANTIA A UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a a protecção deste produto no que respeita a defeitos de fabrico de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra do mesmo produto.