PLEASE DO NOT DISCARD THIS MANUAL AS YOU MAY NEED IT AGAIN IN THE FUTURE! Your ONE FOR ALL 1 can operate a Television. Your ONE FOR ALL 1 remote needs to be powered by 2 new “AA/LR6” Alkaline batteries. WWW.ONEFORALL.COM...
The Power key controls the same function as it did on your original remote. LED: During the use of your ONE FOR ALL 1, the LED will flash red every- time you press a key. Number Keys: The Number keys (0-9, -/--(10), AV (20)) provide the functions just like your original remote, such as the direct access to programme/channel selection.
Page 5
Channel Up / Down Control: The Channel Up / Down keys control the same functions as your original remote control. Recall Key: The Recall key operates the same function it did on the original remote control. If your original remote control does not have a Recall function you can set the Recall function up with the ONE FOR ALL Recall (see page 11).
Now aim the ONE FOR ALL 1 remote at your device (television) and press POWER. If your device switched off, the ONE FOR ALL 1 is ready to operate your device. Turn your television back on and try all the remote’s func- tions to ensure they are working properly.
The Search Method If your television does not respond to the ONE FOR ALL 1 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 1.
Once you have Set-Up your ONE FOR ALL 1, you can blink back your Set-up Code for future reference. To blink out your television code: Press and hold down MAGIC until the ONE FOR ALL 1 red light blinks twice (the red light will blink once then twice).
To scan the channels on your TV: Aim the ONE FOR ALL 1 at your TV. Press the TV key. Press and relea- se MAGIC then press the MUTE key. The ONE FOR ALL 1 will send the command to advance through all the channels available on your television stopping at each channel for about three seconds.
To activate the ONE FOR ALL Sleeptimer: It is possible to set the ONE FOR ALL Sleeptimer for 15, 30, 45 or 60 minu- tes. To do this, first make sure your TV is switched on.
ONE FOR ALL Recall function. The ONE FOR ALL Recall function allows you to program up to two channels, each consisting of a maximum of 4 key presses per channel entry. This allows you to swap back and forth between two channels with the press of a single key.
Customer Service If you still have questions about the operation of your ONE FOR ALL 1 universal remote and could not find the answer(s) in the trouble shooting section, you may want to contact the customer service department for assistance.
Page 18
GARANTIA A UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a protecção deste produto no que respeita a defeitos de fabrico de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra do mesmo produto.