Your ONE FOR ALL 4 can operate four devices: a Television, a Video Recorder, a DVD Player and a Satellite Receiver or Cable Converter. Your ONE FOR ALL 4 remote needs to be powered by 2 new “AA/LR6” Alkaline batteries.
Installing the Batteries Your ONE FOR ALL 4 Remote needs 2 new "AA/LR6" Alkaline batteries. Remove the battery cover from the back of your ONE FOR ALL 4 by pressing down on the arrow on the battery cover and sliding it backwards.
Page 5
Channel Up / Down Control: The Channel Up / Down keys control the same functions as your original remote control. In DVD mode the Channel Up key operates (Next Track) function, and the Channel down key operates (Previous Track) function. Recall Key: The Recall key operates the same function it did on the original remote control.
Before you start, please read these instructions carefully Setting Up Your Devices Example: To set up the ONE FOR ALL 4 for your television: Make sure your device (television) you wish to ope- rate is switched on (not in standby).
The Search Method If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4.
Once you have Set-Up your ONE FOR ALL 4, you can blink back your Set-up Code for future reference. Example: to blink out your television code: Press the TV key once. Press and hold down MAGIC until the ONE FOR ALL 4 red light blinks twice (the red light will blink once then twice).
Now press the SAT key (the device mode key you want changed) and the red light will blink twice. The SAT key of the ONE FOR ALL 4 is now ready to be set-up for your video cassette recorder. To enter the Set-up code for your second VCR, proceed with the setup procedure on page 6 remembering to use VCR codes for the SAT key.
To scan the channels on your TV: Aim the ONE FOR ALL 4 at your TV. Press the TV key. Press and relea- se MAGIC then press the MUTE key. The ONE FOR ALL 4 will send the command to advance through all the channels available on your television stopping at each channel for about three seconds.
To activate the ONE FOR ALL Sleeptimer: It is possible to set the ONE FOR ALL Sleeptimer for 15, 30, 45 or 60 minu- tes. To do this, first make sure your TV (or Satellite) is switched on.
ONE FOR ALL Recall function. The ONE FOR ALL Recall function allows you to program up to two channels, each consisting of a maximum of 4 key presses per channel entry. This allows you to swap back and forth between two channels with the press of a single key.
Customer Service If you still have questions about the operation of your ONE FOR ALL 4 universal remote and could not find the answer(s) in the trouble shooting section, you may want to contact the customer service department for assistance.
Cable Converters Kabelsignalumwandler Décodeurs de câble Decodificadores Conversores de Cabo Convertitori di reti Kabel Decoders 3230025 Alcatel 0896 0897 3231155 Austar 0276 3231544 Canal Plus 0443 3231564 Comcrypt 0443 3231583 Decsat 0423 3231641 Filmnet 0443 3230996 France Telecom 0451 0817 0896 0897 3231076 General Instruments...
Page 24
GARANTIA A UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a protecção deste produto no que respeita a defeitos de fabrico de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra do mesmo produto.