Product Overview; Controls - Toro 38682 Operator's Manual

1. Park
2. Drive

Product Overview

1. Side discharge
2. Mower deck
3. Recoil starter
4. Gas tank

Controls

Become familiar with all the controls (Figure 4) before
you start the engine and operate the machine.
3. Neutral
4. Engine—stop
Figure 3
5. Controls
6. Handle
7. Caster wheel
106-2737
1. Throttle control
2. Ignition switch
3. Neutral/parking brake lock
4. Operator Presence
Control (OPC) lever
5. Handle
Throttle Control
The throttle control has two positions: Fast and Slow.
Operator Presence Control (OPC)
Levers
When you squeeze the OPC levers against the handles,
the OPC system senses that the operator is in the normal
operating position. When you release the OPC levers,
the OPC system senses that the operator has left the
normal operating position, and the system will stop the
engine if either the gear shift lever is not in the neutral
position or the blade control (PTO) lever is engaged.
9
5. Engine—run
6. Warning—wear ear protection.
Figure 4
6. Drive lever
7. Gear shift lever
8. Choke
9. Power take off lever (PTO)