Specifications; Attachments/Accessories - Toro 38682 Operator's Manual

Gear Shift Lever
The transmission has five forward speeds, neutral and
reverse, and has an in-line shift pattern.
Important: Do not shift while unit is moving, as
transmission damage may occur.
Drive Levers
Release drive levers to engage forward traction
operation. Squeeze right side of drive lever to turn right
and left side to turn left.
Neutral/Parking Brake Lock
Squeeze drive levers and move the locks rearward for
neutral lock. Squeeze drive levers and move the locks
forward to set the parking brake.
Blade Control Lever (PTO)
This lever is used in conjunction with the OPC levers
to engage or disengage the mower deck belt and drive
the mower blades.
Recoil Starter
Pull the recoil starter handle to start engine (not shown
in).
Fuel Shut-off Valve
Close the fuel shut-off valve when transporting or
storing mower.
Ignition Switch
This switch is used in conjunction with recoil starter and
has two positions: Run and Off.
Choke
Use the choke to start a cold engine.

Specifications

Note: Specifications and design are subject to change
without notice.
32 inch mowers:
Width with deflector down
Length
Height
Weight
45.8 inches (116.3 cm)
78 inches (198.1 cm)
41 inches (104.1 cm)
402 lb (182 kg)
10
36 inch mowers:
Width with deflector down
Length
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
46.6 inches (118.4 cm)
80 inches (203.2 cm)
41 inches (104.1 cm)
462 lb (210 kg)