Table of Contents
Advertisement
In a dual-channel configuration, channel 1 supports the devices in slots 0 to 2, and
channel 2 supports the devices in slots 3 to 6. Set the channel configuration
switches to "Split" and set the terminators accordingly (Table B-3) to achieve a
dual-channel configuration. See Figure B-1 for the locations of the switches and
terminators.
Connect to Wide
SCSI connector on
the system board or
SCSI controller board
Connect to external
SCSI devices
Table B-3 lists the terminator settings for the dual-channel configuration.
Connect SCSI
channel 1 to
slots 0 to 2
Connect SCSI
channel 2 to
slots 3 to 6
Advertisement
Table of Contents
