Table of Contents
Advertisement
16 - 64MB System Memory
Press F6 to edit the resources (IRQs, DMAs, I/O ports or
memory) of the highlighted setting.
Done = F10
c) Press F6 to edit resources. The Enabled screen displays. Use the Tab key
or the up and down arrow keys to move between fields. Use the plus and
minus keys to change resources.
These are the resources used by this choice.
and MINUS (-) keys to change items marked with a plus/minus
symbol.
Done = F10
d) On the above screen, the Memory Address field shows the beginning
memory address (16M); the Memory Amount field shows 16M.
Configure additional memory by changing the Memory Amount field, as
described below.
System Memory Functions
(*) Enabled
( ) Disabled
Edit Resources = F6
Memory Address 16M
Memory Amount
Cancel = ESC
Enabled
16M
Cancel = ESC
Use the PLUS (+)
Advertisement
Table of Contents
