Table of Contents
Advertisement
Each SCSI device on the SCSI bus, including the SCSI controller, must be set to a
unique SCSI ID. The SCSI ID serves two purposes: it uniquely identifies each SCSI
device on the bus, and it determines the device's priority on the bus during the
Arbitration phase. The Arbitration phase determines which device controls the
bus when two or more devices request use of it.
Use the cursor (
) and Enter keys to select the SCSI ID, if you need to change it.
Press Esc at any time to return to the previous menu.
Select this option to enable or disable SCSI Parity Checking on the SCSI controller.
Figure 7-4 displays your choices. The default setting is Enabled.
*
Advertisement
Table of Contents
