Each time you change your system's memory configuration, you must
reconfigure the computer using the ECU.
The following discussion describes how to configure a system for 96 MB of
memory.
1. Highlight Step 3: View or edit details from the ECU main menu, then press
Enter. The View or Edit details screen displays (a sample screen is shown in
Figure 6-4).
2. Use the up and down arrow keys to highlight the memory function you wish
to configure. In this example, your basic system configuration is installed
with 32 MB; therefore, the 16 - 64MB System Memory parameter is the first
memory function you must configure.
a) Highlight 16 - 64MB System Memory, then press Enter.
b) The System Memory Functions screen displays, showing the function is
enabled:
before