Table of Contents
Advertisement
9. Press F10 when you are through. The ECU main menu, Steps in Configuring
Your Computer, reappears.
10. Select Step 5: Save and Exit, then press Enter. The Save and Exit screen
displays.
11. To save your changes, select Save the configuration and restart the
computer, then press Enter.
To discard the changes, choose the option Discard the configuration and
return to the main menu. Any changes that you made are lost.
12. When the reboot screen appears, press Enter.
13. Turn off the computer and remove the ECU diskette, if not running from CD.
Follow these steps when you remove a board:
1. Select Step 2: Add or remove boards from the ECU main menu.
2. Select the board that you want to remove from the configuration and press
c
. A remove confirmation screen appears.
3. Press Enter. The Add or Remove Boards screen reappears.
4. Press F10 when done. The ECU main menu displays.
5. Follow steps 4 to 13 in the previous section, Adding a Board, to complete
your configuration.
Advertisement
Table of Contents
