Preparations Before Installation - Daikin FBQ60BV1 Installation Manual

4. PREPARATIONS BEFORE INSTALLATION

1. Relation of ceiling opening to unit and suspension bolt position. (Refer to Fig. 1)
Indoor unit
Pipe
145
800 (Indoor unit)
For standard installation (air inlet on the both side), choose one of the below two means of installation.
NOTE
• For other than standard installation, contact your Daikin dealer for details.
For mounting decoration panel with canvas duct
Canvas duct for
decoration panel
(Optional accessory)
Ceiling
surface
For mounting decoration panel directly
Ceiling
surface
(Ceiling opening)
2. The fan speed for this indoor unit is preset to provide standard external static pres-
sure.
• If higher or lower external static pressure is required, reset the external static pressure by changing
the initial setting from the remote controller. Refer to the section entitled "10. FIELD SETTING".
English
630
Suspension bolt (×4)
(Suspension
bolt pitch)
Fig. 1
180
462
(Ceiling opening)
180
462
Decoration panel
Decoration panel
(Optional accessory)
Indoor unit
(Back side)
(Ceiling opening)
Indoor unit
(Back side)
1060
(Ceiling opening)
1060
6