Maintenance - Toro 02003 Operator's Manual

Maintenance

Maintenance Procedure
Check battery fluid/connections
Lubricate grease fittings
Service the air cleaner
Change the engine oil and filter
Check the cutting unit's belt tension
Service the air filter cartridge
Change engine oil
Torque the wheel lug nuts
Check the fan belt
Change the enging oil filter
Replace the hydraulic filter
Adjust the clutch
Change the hydraulic fluid filter
Change hydraulic fluid
‡Check engine RPM (idle and full throttle)
Change front axle oil
Replace the fuel filter cartridge
De-carbon the combustion chamber
Torque head bolts and adjust valves
Initial break in at 8 hours
‡Initial break in at 50 hours
Replace moving hoses
Replace safety switches
Fuel tank—drain and flush
Hydraulic tank—drain and flush
Daily Maintenance Checklist
Safety Interlock Operation
Brake Operation
Engine Oil & Fuel Level
Cooling System Fluid Level'
Air Cleaner
Drain Water/Fuel Separator
Clean Engine and Radiator
Unusual Engine Noises
Unusual Operating Noises
22
Maintenance Schedule
Every
Every
25
hours
Items are recommended every 1000 hours
Maintenance Interval & Service
Every Every
50 100 200
hours hours hours
Recommendations
or 2 years, whichever occurs first.
Hydraulic System Oil Level
Hydraulic Hoses for Damage
Fluid Leaks
Tire Pressure
Instrument Operations
Reel-to-Bedknife Adjustment
Height-of-Cut Adjustment
Cutting Unit Belt Adjustment
Lubricate all grease fittings
Touch up damaged paint
1
= Immediately after every washing, regardless of the
interval listed
Every Every
400 800
hours hours
1