Toro 30881 Operator's Manual page 20

Protected Menus
There are 4 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle, maximum mowing-ground speed, maximum
transport-ground speed, and deck counter balance. These
settings are in the Protected Menu.
Accessing the Protected Menu Settings
1. From the Main Menu, scroll down to the Settings
Menu and press the right button.
2. In the Settings Menu, scroll down to the Protected
Menu and press the right button.
3. To enter the passcode, use the center button to set
the first digit then press the right button to move on
to the next digit.
4. Use the center button to set the second digit then press
the right button to move on to the next digit.
5. Use the center button to set the third digit then press
the right button to move on to the next digit.
6. Use the center button to set the fourth digit then press
the right button.
7. Press the middle button to enter the code.
Viewing and Changing the Protected Menu Settings
1. In the Protected Menu, scroll down to Protect Settings.
2. To view and change the settings without entering a
passcode, use the right button to change the Protect
Settings to O .
FF
3. To view and change the settings with a passcode, use
the left button to select O
the key in the ignition switch to the O
then to the O position.
N
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle time
between O , 8S, 10S, 15S, 20S, and 30S.
FF
Setting the Maximum Allowed Mow Speed
1. In the Settings Menu, scroll down to Mow Speed and
press the right button.
2. Use the right button to increase the max full mow
speed (50%, 75%, or 100%).
3. Use the center button to decrease the max full mow
speed (50%, 75%, or 100%).
4. Press the left button to exit.
, set the passcode, and turn
N
position and
FF
Setting the Maximum Allowed Transport Speed
1. In the Settings Menu, scroll down to Transport Speed
and press the right button.
2. Use the right button to increase the max transport
speed (50%, 75%, or 100%).
3. Use the center button to decrease the max transport
speed (50%, 75%, or 100%).
4. Press the left button to exit.
To Set the Counterbalance
1. In the Settings Menu, scroll down to Counter Balance
and press the right button.
2. Press the right button to switch between Low, Med,
and High.
When finished with the Protected Menu, press the left button
to exit to the Main Menu, then press the left button to exit
to the Run Menu.
Stationary Regeneration
If the Stationary Regeneration icon appears on the InfoCenter,
refer to the Service Manual or contact your Toro Distributor
for the maintenance procedure.
20