Greasing The Machine; Checking Fluid Levels - Toro 30881 Operator's Manual

1
1. Hood latch
7. Screw the bolt into the other arm of the hood-lock
bracket to lock the latch in position
the bolt securely but do not tighten the nut.
3
2
1
1. Bolt
2. Nut
3

Greasing the Machine

No Parts Required
Procedure
Grease the machine before operating to ensure that it is
properly lubricated; refer to
properly grease the machine results in premature failure of
critical parts.
G012630
Figure 5
(Figure 6). Tighten
G012631
Figure 6
3. Arm of hood-lock bracket
Lubrication (page 33). Failure to
4

Checking Fluid Levels

No Parts Required
Procedure
1. Check the rear axle lubricant level before the engine is
first started; refer to
(page 42).
2. Check the hydraulic-fluid level before the engine is first
started; refer to
(page 25).
3. Check the engine-oil level before and after the engine
is first started; refer to
Level (page 25).
14
Checking the Rear Axle Lubricant
Checking the Hydraulic-Fluid Level
Checking the Hydraulic-Fluid