Toro 30881 Operator's Manual page 17

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
is a splash screen and a main information screen in the
InfoCenter. Press any of the InfoCenter buttons and then
select the appropriate directional arrow to switch between the
splash screen and the main information screen.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press to access
the InfoCenter menus. You can use it to back out of any
menu you are currently using.
•
Middle Button—press to scroll down menus.
•
Right Button—press to open a menu where a right arrow
indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note: The purpose of each button may change
depending on what is required at the time. Each button is
labeled with an icon displaying its current function.
(Figure 11). There
g020650
2
3
Figure 11
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
17
Indicates when scheduled service
should be performed
The status of the engine rpm.
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed.
Stationary regeneration is required.
The air-intake heater is active.
Raise the left deck.
Raise the center deck
Raise the right deck
The operator must sit in the seat.
The parking brake is on.
The range is high.
Neutral position
The range is low.
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed
Start the engine.
The PTO is on.