Toro 30881 Operator's Manual page 19

Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This brings you to the main
menu. Refer to the following tables for a synopsis of the
options available from the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Left Deck
Center Deck
Right Deck
Traction Pedal
Traction
HI/LO Range
PTO
Engine Run
Settings
Menu Item
Units
Description
Contains a list of the recent
machine faults. Refer to
the Service Manual or your
Toro Distributor for more
information on the Faults
menu and the information
contained there.
Contains information on the
machine such as hours of use
and other similar numbers.
Lists various states that the
machine currently has. You
can use this to troubleshoot
certain issues as it quickly tells
you which machine controls
are on and which are off.
Allows you to customize and
modify configuration variables
on the InfoCenter display.
Lists the model number, serial
number, and software version
of your machine.
Description
Lists the total number of hours
that the machine, engine and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated.
Lists the number of starts,
deck PTO cycles, and fan
reversals the machine has
experienced.
Description
Refer to the Service Manual or
your Toro Distributor for more
information on the Engine
Run menu and the information
contained there.
Description
Controls the units used on the
InfoCenter (English or Metric).
Language
LCD Backlight
LCD Contrast
Protected Menus
Protect Settings
Auto Idle
Mow Speed
Trans. Speed
Counterbalance
* Only "operator-faced" text is translated. Faults, Service,
and Diagnostics screens are "service-faced". Titles are in the
selected language, but menu items are in English.
About
Menu Item
Model
SN
S/W Rev
19
Controls the language used
on the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the maintenance
director to access protected
menus by inputting a
passcode.
Allows the ability to change
the settings in the protected
settings.
Controls the amount of time
allowed before idling the
engine when the machine is
not in use.
Controls the maximum speed
while in mow (low range).
Controls the maximum speed
while in transport (high range).
Controls the amount of
counterbalance applied by the
decks.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.