pressure can have sufficient force to penetrate the
skin and cause serious injury. If fluid is injected into
the skin it must be surgically removed within a few
hours by a doctor familiar with this form of injury
or gangrene may result.
• Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
• Before disconnecting or performing any work on
the hydraulic system, all pressure in the system must
be relieved by stopping the engine and lowering the
cutting units to the ground.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting
units, attachments, and any moving parts. Keep
everyone away.
• Do not overspeed the engine by changing governor
settings. To ensure safety and accuracy, have an
Authorized Toro Distributor check the maximum
engine speed with a tachometer.
• The engine must be shut off before checking the oil
or adding oil to the crankcase.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other
manufacturers could be dangerous, and such use
could void the product warranty.
Sound Power Level
This unit has a guaranteed sound power level of 105
dBA, based on measurements of identical machines per
ISO 11094.
Sound Pressure Level
This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 83 dBA based
on measurements of identical machines per EN 836 and
ISO 11201.
Vibration Level
This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines
per EN836 and EN 1033.
This unit does not exceed a vibration level of 0.5 m/s
at the posterior based on measurements of identical
machines per EN 836 and EN 1032.
2
at
2
7