Troubleshooting Tips; Care And Maintenance - Omron HBF-400 Instruction Manual

Fat loss monitor with scale
Hide thumbs Also See for HBF-400:
Table of Contents

Advertisement

PROBLEM
Low Battery Indicator
No power
No display appears on the unit
The weight value is displayed abnormally
low or high
.
The % FAT value is displayed abnormally
low or high.
Other conditions

CARE AND MAINTENANCE

To keep your Fat Loss MONITOR with Scale in the best condition and protect the unit from damage
follow the directions below:
Clean the unit with a soft dry cloth. Avoid using any abrasive or volatile cleaners. The unit is not
waterproof; do not immerse the unit in water.
Store the unit in a safe and dry location. Do not expose the unit to direct sunlight, extreme hot or cold
temperatures or humidity. Thoroughly dry any moisture off the unit before storing. Store the unit safely
out of the reach of children.
Do not subject the unit to strong shocks, such as dropping the unit on the floor.
Remove the batteries if the unit will not be used for three months or longer.
Use the unit consistent with the instruction provided in this manual.

TROUBLESHOOTING TIPS

CAUSE AND SOLUTION
Check the battery installation for proper
placement of the battery polarities.
Replace all four worn batteries.
Place the monitor on a hard, level floor.
Refer to "When to avoid taking a measurement"
on page 13, and "Recommended Measurement
Times" on page 6.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to "Battery
Installation" on page 9.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents