BOMBARDIER Outlander 400 Operator's Manual page 73

Speedometer Display Codes
Speedometer Reads FAIL
vmo2006-005-037
If your speedometer shows FAIL in
the multi-function display, it means
that the speedometer as sensed 18
volts in the electrical system, caused
by a disconnected or defective voltage
regulator.
Check voltage regulator connection or
contact an authorized Bombardier ATV
dealer for voltage regulator replace-
ment.
Speedometer Reads SCALE
vmo2006-005-038
If your speedometer shows SCALE
in the multi-function display, it means
that the display selector button is
stuck in the down position or de-
pressed when the electrical system
was activated.
Display Selector Button
Use selector
speedometer display to the desired
mode:
– hourmeter
– odometer
– trip meter 1
– trip meter 2
vmo2006-005-015_b
1. Selector button
Multi-Function Display
Odometer (ODO)
Odometer records the total distance
travelled either in miles or kilometers.
Trip Meter (TRIP 1/TRIP 2)
For
speedometer
two separate trip meter.
The trip meter records distance trav-
elled since it has been reset. Distance
travelled is displayed either in miles or
kilometers.
It can be used to establish a fuel tank
range or distance between 2 way
points for instance.
Push and HOLD display selection but-
ton for 2 seconds to reset the trip me-
ter.
_____________________
button
your convenience,
is equipped
to change
your
with
71