Dipstick; Winch; Winch Control Switch; Fairlead - BOMBARDIER Outlander 400 Operator's Manual

Located on right side of vehicle. Au-
to-rewind type. To engage mecha-
nism, pull handle slowly until a resis-
tance is felt then continue to slowly
pull the handle until the compression
stroke peak (strong rotating resis-
tance) is overpassed then, pull vigor-
ously. Slowly release handle.
vmo2006-005-034_b
1. Rewind starter handle

2. Dipstick

24) Dipstick
Located on the right side of engine.
Allow to check the oil level in the en-
gine.
vmo2006-005-034_b
1. Rewind starter handle
2. Dipstick
Refer to LIQUID to check the engine
oil level correctly.

25) Winch

XT Models
Located behind front skid plate.
______________________
78
vmo2006-005-031_a
1. Winch
2. Front skid plate

3. Fairlead

4. Winch hook

26) Winch Control Switch

XT Models
Located on the left side of the handle-
bar.
To take out wire rope from winch,
press the left side of switch.
To get wire rope into the winch, press
the right side of switch.
Refer to ATV Winch Operator's manual
for more informations.
vmo2006-005-032_a
1. In
2. Out
27) Fairlead
XT Models
Located on the front of skid plate.