Handle Bars Installation - HELIX HLT2500 Assembly Manual

3 AssembLy - HAnDLe bARs
1

HANDLE BARS INSTALLATION :

Step 8:
For ease of installation, first install two handlebar bolts temporarily one in each of the holes show above
the arrow in Figure #1 above.
3
Step 9:
Then holding one handlebar in your hand, carefully feed the pulse sensor wire into the upright and out
of the hole at the top of the upright Figure #3. Once the wire is out of the top of the upright, remove
one of the temporary bolts and use it to secure the handlebar in place while you prepare to install the
remaining 3 bolts into the handlebar on that side. Repeat for the other side as shown above Figure #4.
2
4
PAGE 10