Using Audio for surveillance purpose and/or recording must
comply with local applicable codes and regulations.
Alarm input connection
The camera supports the external alarm input as shown below.
Both NO (Normally Open) and NC (Normally Closed) type
relays are supported. Please remember to check the Alarm
menu by selecting the NO/NC alarm type according to the
connected electric relay type.
Camera
Alarm output connection
The camera can trigger an external alarm device when a motion
detection event occurs.
Please note that the camera GND must be always connected to
the negative power terminal. The maximum current into the
camera "Alarm Output" is 30 mA at 12 VDC.
16
Alarm input
GND
Installation Guide