Figure 3: WPS options
PBC mode: Push the WPS button on the Wi-Fi router. The
WPS indicator will flash. (The WPS settings may be different
per device. Please refer to the Wi-Fi router user manual for
details). Then check the
Connect
the
button. The camera and the Wi-Fi router are
automatically connected.
PIN mode: The PIN code is printed on the Wi-Fi router device.
Enter the PIN code in the
Use Router PIN Code.
camera to the Wi-Fi router.
You can generate the PIN code on the camera side and
configure the Wi-Fi router to finish the connection setting.
(Please check the Wi-Fi router User Manual for details). Please
note that the PIN code expiration time is 120 seconds.
Accessing the SD card
Insert a Micro SD card with up to 64GB for local storage as a
backup in case, for example, the network fails (see Figure 1 on
page 6). The SD card is not supplied with the camera.
14
PBC Connection
Router PIN Code
Then click
Connect
checkbox and click
bar and check the
to connect the
Installation Guide