Table of Contents
Advertisement
PANEL VIEW-1
FRONT PANEL
1
2
3
4
15 16 17
1. POWER switch and STANDBY indicator
Turns on the main power supply for the DV-S757. The DV-S757
enters standby state and the STANDBY indicator lights up.
Pressing the switch again to the off position (
the main power supply into the DV-S757.
Before turning on the power, make sure all cables are properly
connected.
2. STANDBY/ON button
When STANDBY/ON button is pressed to ON while the POWER
switch is set to ON, the DV-S757 turns on and the STANDBY
indicator turns off. The indicator around
Pressing the button again returns the DV-S757
to the standby state. This state turns off the display, disables
control functions.
3. VIDEO CIRCUIT OFF button and indicator
Press to switch the video signal off.
4. LAST MEMORY button
You can resume DVD or Video CD playback from the point you
last watched even if the disc is removed from the player. Press
LAST MEMORY during playback to set a Last Memory point.
When you want to resume playback of that disc, press LAST
MEMORY in the stop mode and playback starts from the
memorized point. Last Memory locations can be stored for up to 5
DVDs and 1 Video CD.
5. CLEAR button
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
7. Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
8. TOP MENU button
Press to call up the top menu programmed on the DVD.
Depending on the DVD, the top menu may be identical to the
DVD menu.
9. Cursor (
) button/ENTER button
Use
to move through the options on menu screens and
to change settings. Use ENTER to implement settings selected
with the cursor buttons or to set items highlighted in a menu.
10. MENU button
Use to display or close the DVD menu or MP3 Navigator screen.
5
6
18
OFF) shuts down
button light up.
7
8
9 10 11 12
19
20
21
11.
button
Press to open and close the disc tray.
12.
PAUSE button
Press during playback to pause. Press again to resume playback.
13.
STOP button
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it stopped.
Pressing twice causes the disc to return to the beginning of the
disc if playback starts again.
Whenever a disc is loaded in the player, indicator above
lights up.
14.
PLAY button
Press to start or resume playback.
Whenever a disc is loaded in the player, indicator above
lights up.
15. DIMMER button
Toggle to control the lightness of the display (3 steps).
16. REPEAT button
Use to set the repeat mode.
17. RANDOM button
Press to play chapters/tracks in random order.
18. Remote control sensor
Point the remote control toward the remote sensor to operate the
player.
19. RETURN button
Use to go one menu back (current settings are maintained). Use
RETURN when you do not want to change the option setting in a
menu.
20. SETUP button
Press when the player is in either play or stop mode to open and
close the Setup screen.
21. DISPLAY button
Press during playback to display statistical disc information.
Press repeatedly to display different information.
22.
button
Press to go back or advance to previous chapters/tracks. Press
and hold to perform fast-reverse/fast-forward playback scanning.
23. PHONES jack
This is a standard stereo jack for connecting stereo headphones
The audio for the ANALOG OUTPUT CH 1 and CH 2 are sent to
the headphone speakers.
24. PHONES LEVEL dial
Use to control the phones level. Turn the dial clockwise to
increase the phones level and counterclockwise to decrease it.
DV-S757
13
14
22
23
24
STOP
PLAY
Advertisement
Table of Contents
