Table of Contents
Advertisement
DISASSEMBLING PROCEDURES-1
1. Optical pick-up are parts which are easy to receive damage with static electricity.
Therefore, in case reassembly mechanism, take the measures against static electricity.
2. The number of ( ) in the explanatory note and
How to remove the DVD mechanism from chassis
1
Remove the top cover
Begin to pull the tray by rotating the gear pulley (14)
2
clockwise.
How to disassembling the DVD mechanism
1
Remove the screw and remove the bridge (19).
screw
Begin to pull the tray by rotating the gear pulley (14)
2
clockwise.
bottom view
14
19
in the figure shows Ref. No. of the exploded view.
3
Remove the tray panel.
tray panel
Remove the four screws which is fixing the dvd
4
mechanism to the chassis, and remove the
mechanism from chassis.
Remove the tray by pressing down the stopper
3
SW lever (17).
tray
Set the pick short switch to short side.
4
[NOTE]
Do not disconnect the FFC and wire before doing
this work.
DV-S757
stopper
open
short
Advertisement
Table of Contents
