Table of Contents
Advertisement
UPGRADE FIRMWARE-4
Check the firmware
1. Press the SETUP key
2. Operate the CURSOR switch to make up the Setup menu mode are selected on monitor TV.
3. Press the DISPLAY button
The region and FW version information will appear on the monitor TV.
About ID number and ID data input
It is necessary to set up an individual number (ID number and ID data) for every player in the
DVD audio correspondence player.
The guarantee of operation becomes impossible if this ID number and ID data are not set up correctly.
It is the following case that the input of ID number is required.
1. After download of the data to the flash ROM of the unit.
2. When displayed on FL display as "No ID Number "after turning ON the power supply of the unit.
3. When displayed on FL display as "No ID DATA".
Check ID number.
The input of ID number is needed by the work of rewriting of a farm.
Make a note by checking ID number of a set with the following procedure first.
1. Check the connecting the unit to PC and monitor TV.
2. Switch ON the power of unit.
3. Check that the disk is not contained in the unit.
4. Press and hold down CLEAR button, then press the KEY button of remote controller.
5. Press the VOL+ button.
6
DVD
DVD
TV
TV
Setting
Setting
TV
TV
position
position
6. Press the B button, and check mode is ended.
STANDBY
ANGLE
AUDIO
SUBTITLE
TV Monitor
LAST M
COND. M
DIMMER
DISPLAY
TOP MENU
MENU
5
CH -
CH +
VOL +
ENTER
VOL -
RETURN
SETUP
TV/ VCR
PAUSE
FR
FF
DOWN
UP
STEP/ SLOW
+
1
2
3
-
4
5
6
FUNCTION M
7
8
9
SEARCH
CLEAR
+10
0
4
RANDOM REPEAT
A-B
PROGRAM
B
KEY
DVD
TV
[Player's ID Number Setting]
ID Number
[000000001]
compare
>
*********
<CLEAR> Exit
Input ID Number !
DV-S757
FL Display
000000001
Set-up ID number is displayed.
It is displayed also on FL display.
This ID number is recorded
in the memorandum.
Advertisement
Table of Contents
