Maintenance; Recommended Maintenance Schedule(S); Preparing For Maintenance; Servicing The Air Cleaner - Toro 20382 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 25 hours
Before storage
Yearly
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.

Preparing for Maintenance

1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the spark-plug wire from the spark plug
(Figure 30) before performing any maintenance
procedure.
Figure 30
3. After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.
Important: Before tipping the machine to change
the oil or replace the blade, allow the fuel tank to
run dry through normal usage. If you must tip
the machine prior to running out of fuel, use a
hand fuel pump to remove the fuel. Always tip the
machine onto its side with the dipstick down.
WARNING
Tipping the machine may cause the fuel to
leak. Gasoline is flammable, explosive and
can cause personal injury.
Run the engine dry or remove the gasoline
with a hand pump; never siphon.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Service the air cleaner.
• Ensure that the engine stops within 3 seconds after releasing the blade-control bar.
• Clean grass clippings and dirt from under the machine.
• Lubricate the rear wheel gears.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Empty the fuel tank before repairs as directed and before annual storage.
• Service the air cleaner.
• Change the engine oil.

Servicing the Air Cleaner

Service Interval: Before each use or daily
Yearly
1. Press down on the latch tabs on top of the air cleaner
cover (Figure 31).
1. Latch tabs
2. Open the cover.
3. Remove the paper air filter (Figure 32).
15
Figure 31