Adjusting The Cutting Height; Using The Grass Bag - Toro 22196 Operator's Manual

21in heavy-duty recycler/rear bagger lawn mower
Hide thumbs Also See for 22196:
Table of Contents

Advertisement

Adjusting the Cutting Height

Each wheel is adjusted individually with a wheel height
adjustment lever. Cutting heights are 3/4 inch (19 mm),
1-1/4 inches (32 mm), 1-3/4 inches (44 mm), 2-1/4
inches (57 mm), 2-3/4 inches (70 mm), and 3-1/4
inches (83 mm).
Adjusting the cutting height levers could bring
your hands into contact with a moving blade
and result in serious injury.
• Stop the engine and wait for all movement
to stop before adjusting the cutting height.
• Do not put your fingers under the housing
when adjusting the cutting height.
1. Pull the wheel height adjustment lever toward the
wheel (Figure 21) and move it to the desired setting.
Figure 21
1. Wheel height adjustment lever
2. Release the wheel height adjustment lever and seat
it securely in the notch.
3. Adjust all the wheels to the same cutting height
setting.

Using the Grass Bag

Occasionally, you may wish to use the grass bag for
bagging extra long grass, lush grass, or leaves.
Installing the Grass Bag
1. Stop the engine and wait for all moving parts to
stop.
2. Ensure that the discharge door handle is fully
forward and that the pin is engaged in the catch
(Figure 22).
1. Bag frame on retaining
post
2. Pin engaged in catch
3. Slide the hole in the bag frame onto the retaining
post on the discharge tunnel (Figure 22).
4. Set the rear of the bag frame onto the bag support
rod.
5. Pull the discharge door handle forward until the pin
clears the catch, and move the handle rearward until
the pin locks in the bag notch (Figure 23).
1. Pin locked in bag notch
Note: The discharge door in the mower housing is
now open.
Mowing with the Grass Bag
A worn grass bag could allow small stones
and other similar debris to be thrown in the
operator's or bystander's direction and result in
serious personal injury or death to the operator
or bystanders.
Check the grass bag frequently. If it is
damaged, install a new Toro replacement bag.
16
Figure 22
3. Handle fully forward;
discharge door closed
Figure 23

Advertisement

Table of Contents
loading

Table of Contents