Lubrication
Lubricating the Pivot Arms
Service Interval: Every 25 hours
1. Move the rear wheel cutting height levers to the
center setting.
2. Wipe the grease fittings with a clean rag (Figure 24).
Figure 24
1. Grease fitting
3. Install a grease gun onto the fitting and gently apply
2 or 3 pumps of #2 multi-purpose lithium base
grease (Figure 24).
Important: Excessive grease pressure may
damage the seals.
Lubricating the Gear Case
Service Interval: Every 100 hours
1. Remove the grass bag.
2. Install a grease gun onto the fitting through the belt
cover opening (Figure 25).
1. Belt cover
3. Gently apply one to 2 pumps of #2 multi-purpose
lithium-base grease.
4. Install the grass bag.
20
Figure 25
2. Grease fitting