Konica Minolta bizhub C252 Operator's Manual page 141

Routing a document from the system user box
3
Select the document, and touch [Route].
– To select all documents, touch [Select All]. To deselect all
documents, touch [Reset].
A screen appears, allowing you to specify the destination.
4
Specify the destination by using the programs and groups.
5
If necessary, check the document information and specify the text.
6
Press the [Start] key in the control panel.
Note
To change the print settings specified with a program, select the
destination program, and then change the settings.
If there are limitations on the document name due to the destination
server conditions, it may not be possible to send the transmission.
Contact your network administrator for information when specifying the
document name during a transmission.
bizhub C252
6
6-7