Table of Contents
Advertisement
DVM Hydro Unit_MWR-WW00_IB_EN_03648A(1).indd 19
6. After pressing the [＞] button, select 'On/Off' timer.
f You can select On or Off by repeatedly pressing the [∧]/[∨] button .
f When selecting 'Off' , follow step 8 or 9 .
• You cannot use timer function for hot water mode(saving/standard/
power) when you select the use of hot water function as no use in the field
NOTE
specification setting with installation of an wired remote controller or when
you use other company's water tank .
• When the use of booster heater has selection 'no use' in the field specification
setting with the installation of a wired remote controller, you cannot use timer
function for power hot water mode(DHW) .
7. After pressing the [＞] button, select hot water mode or silent mode.
f You can set hot water mode or silent mode by pressing the [∧]/[∨] or Mode
button in DHW and Silent buttons .
• When setting hot water supply as 'No' or silent function is not supported,
selection will be limited .
NOTE
8. Complete timer function by pressing the Set button.
f When additional timer is needed, re-select the setting from daily timer or weekly
timer .
9. Press the ESC button to exit normal mode.
• If you want to cancel daily timer while you are setting them, press the ESC
button .
NOTE
19
2013-01-09 오후 2:06:27
Advertisement
Table of Contents
