21
STORAGE
21.2
Preparing for use after storage
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Remove the vehicle from the center stand. (
–
Install the battery.
Info
If the battery was removed, the time and date must be set.
–
Perform checks and maintenance measures when preparing for use. (
–
Take a test ride.
401059-01
p. 113)
(
p. 175)
222
p. 93)