16
ELECTRICAL SYSTEM
16.10
Changing the low beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the wind shield. (
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
–
Remove the crash bar.
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Unplug connector
M00850-10
p. 144)
p. 114)
p. 116)
(
p. 146)
p. 129)
p. 140)
(
p. 133)
lightly into the bulb socket, turn it all the way counterclock-
.
p. 185)
189