KTM 1290 Super Adventure Owner's Manual page 164

15 WHEELS, TIRES
Guideline
Screw, front wheel spindle
–
Position the brake calipers.
The brake linings are correctly positioned.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
M00835-11
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis screws
–
Remove the vehicle from the center stand. (
M00834-11
M25x1.5

on both brake calipers but do not tighten yet.

on both brake calipers.
M10
 in the drill hole.

.
45 Nm Thread greased
(33.2 lbf ft)
45 Nm Loctite
(33.2 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 113)
162
® 243™