16
ELECTRICAL SYSTEM
16.12
Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Plug connector
High beam (H11/socket PGJ19-2) (
–
Position headlight bulb
The headlight bulb is locked into the bulb socket.
M00852-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Install the mask spoiler.
–
Install the tank cover. (
–
Install the front side cover. (
–
Install the crash bar.
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Install the wind shield. (
–
Check the setting of the lighting system. (
into the new headlight bulb.
p. 232)
into the bulb socket and turn it all the way clockwise.
(
p. 136)
p. 142)
p. 131)
(
p. 147)
p. 117)
p. 115)
p. 144)
p. 187)
p. 194)
192