Table of Contents

Advertisement

Advanced (Playback)
w Single setting
1 Press / to select the picture
and then press  to SET/
CANCEL.
The protect icon [
[SET]
appears.
The protect icon [
[CANCEL]
disappears.
2 Press [MENU/SET] twice to close
the menu.
w Multi setting/To cancel all settings
Perform the same operation as in
"[DPOF PRINT]". (P104 to 105)
• If you press [MENU/SET] while cancelling
protection, the cancelling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
• Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card's Write-Protect switch
[LOCK].
• The following functions cannot be used
with protected pictures.
– [ROTATE]
106
VQT1G06
]
]
is set to
2

– [AUDIO DUB.]

– [TITLE EDIT]
[AUDIO DUB.]
Adding audio after taking pictures
MENU
Press [
] to display the [PLAY] mode
SET
menu and select the item to set. (P94)
You can add the audio after taking a
picture.
1 Press / to select the picture
and then press  to start audio
recording.
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press  to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
– Pictures recorded when the quality is
set to [RAW] or [RAWKJPEG]
2 Press  to stop recording.
• The audio recording stops
automatically if  is not pressed after
about 10 seconds.
3 Press [MENU/SET] twice to close
the menu.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents