About The Setup Menu - Panasonic DMC-FZ18 Operating Instructions Manual

Preparation
3 Press .
• Select a menu item next and set it.

About the Setup Menu

• Set items as required.
• Select [RESET] to return the settings to
the initial settings at the time of purchase.
(P22)
• [CLOCK SET], [AUTO REVIEW] and
[POWER SAVE] are important items.
Check their settings before using them.
[CLOCK SET] (P16)
(Changing the date and time.)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P18)
Change date and time.
[AUTO REVIEW]
(Displaying the recorded picture.)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P18)
Set the length of time that the picture is
displayed after taking it.
[OFF]
[1SEC.]
[3SEC.]
[ZOOM]: The picture is displayed for
1 second and then enlarged
4M and displayed for 1 more
second.
• The auto review function is not activated
in motion picture mode [
• The auto review function is activated
regardless of its setting when using the
auto bracket (P46) and burst (P47)
modes, as well as when recording still
20
VQT1G06
pictures with audio (P78). (The pictures
are not enlarged.)
• When the quality is set to [RAW] or
[RAWKJPEG], the auto review function
works until the end of recording onto the
card. (The picture is not enlarged.)
or
• The auto review setting is disabled when
using auto bracket or burst mode, in
motion picture mode [
[AUDIO REC.] is set to [ON] or when the
quality is set to [RAW] or [RAWKJPEG].
• In intelligent auto mode [
review function is fixed to [1SEC.].
(Turning off this unit automatically.)
Press [
and select the item to set. (P18)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[1MIN.], [2MIN.], [5MIN.], [10MIN.], [OFF]
• Press the shutter button halfway or turn
this unit off and on to cancel power save
mode.
• In intelligent auto mode [
mode is fixed to [5MIN.].
• Power save mode is not activated in the
following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion
– During a slide show
Press [
and select the item to set. (P18)
Set the time in your home area and travel
destination.
[
[
].
[POWER SAVE]
MENU
] to display the [SETUP] menu
SET
(DMW-AC7G; optional)
pictures
[WORLD TIME] (P69)
MENU
] to display the [SETUP] menu
SET
]: Travel destination area
]: Your home area
], when
], the auto
], power save