B [Audio Dub.]; S [Copy] - Panasonic Lumix DMC-LX3 Operating Instructions Manual

You can add the audio after taking a picture.
1
Select [AUDIO DUB.] on the [PLAYBACK] mode menu.
2
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
•
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
Audio is recorded from the built-in microphone on the camera.
•
If you press [‚], the audio dubbing is cancelled.
•
3
Press [MENU/SET] to stop recording.
It will automatically stop after recording about 10 seconds without
•
pressing [MENU/SET].
4
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
•
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
•
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
1
Select [COPY] on the [PLAYBACK] mode menu.
2
Press 3/4 to select the copy destination and then
press [MENU/SET].
: All the picture data in the built-in memory are copied
onto the card at one time. > step
: One picture at a time is copied from the card to the
built-in memory. > step
3
Press 2/1 to select the picture and then press [MENU/SET].

B [AUDIO DUB.]

S [COPY]

4
.
3
.
Advanced (Playback)
(P20)
(P20)
VQT1T46
109